Test Equipment
- Analyzers »
- Impedance Analyzers
- Logic Analyzers
- Network Analyzers »
- DC - 3 GHz
- > 3 GHz - 8.5 GHz
- > 8.5 GHz - 26.5 GHz
- > 26.5 GHz - 50 GHz
- > 50 GHz
- Noise Figure Analyzers
- Parameter Analyzers
- Phase Analyzers
- Signal Analyzers
- Signal Source Analyzers
- Source Analyzers »
- Spectrum Analyzers »
- Generators »
- Meters »
- Oscilloscopes »
- Power Supply »
- Other »
N4433A - Keysight (Agilent) Network Analyzer
- Model: N4433A
- Manufactured by: Keysight / Agilent Technologies
Keysight Agilent N4433A-010 N4433-60003 300kHz - 20GHz 3.5mm (F), 4-port Calibration Module
Option Installed:
010 - Four 3.5 mm female Connectors
Features:
300kHz to 20GHz frequency range
Standard 3.5mm (f) connectors
Fast full 3- or 4-port calibration with a single connection
NIST traceable accurate calibrations
Reduced connector wear
USB interface for direct control with PNA and ENA series of network analyzers
Reliable solid-state switching
Description:
The Keysight/Agilent N4433A Microwave electronic calibration (ECal) module makes the calibration of vector network analyzers fast, easy, and accurate. ECal is a precision, single-connection calibration technique for your vector network analyzer. Performing a full three- or four-port calibration takes less than half the time and a number of connections using ECal versus mechanical cal kits. Furthermore, the accuracy of the calibration is comparable to mechanical methods. Traditional mechanical calibrations require intensive operator interaction, which is prone to errors. With ECal, the operator simply connects the ECal module to the network analyzer and the software controls the rest.
ECal modules are transfer standards capable of transferring the factory calibration accuracy to your network analyzer. The Keysight PNA and ENA series of network analyzers control the N4433A module directly through a USB interface. PNA Series network analyzers require firmware revision 2.5 or higher.
Option Installed:
010 - Four 3.5 mm female Connectors
Features:
300kHz to 20GHz frequency range
Standard 3.5mm (f) connectors
Fast full 3- or 4-port calibration with a single connection
NIST traceable accurate calibrations
Reduced connector wear
USB interface for direct control with PNA and ENA series of network analyzers
Reliable solid-state switching
Description:
The Keysight/Agilent N4433A Microwave electronic calibration (ECal) module makes the calibration of vector network analyzers fast, easy, and accurate. ECal is a precision, single-connection calibration technique for your vector network analyzer. Performing a full three- or four-port calibration takes less than half the time and a number of connections using ECal versus mechanical cal kits. Furthermore, the accuracy of the calibration is comparable to mechanical methods. Traditional mechanical calibrations require intensive operator interaction, which is prone to errors. With ECal, the operator simply connects the ECal module to the network analyzer and the software controls the rest.
ECal modules are transfer standards capable of transferring the factory calibration accuracy to your network analyzer. The Keysight PNA and ENA series of network analyzers control the N4433A module directly through a USB interface. PNA Series network analyzers require firmware revision 2.5 or higher.
Your IP Address is: 18.97.14.87
Copyright © 2024 RFTE Solutions