Test Equipment
- Analyzers »
- Impedance Analyzers
- Logic Analyzers
- Network Analyzers »
- DC - 3 GHz
- > 3 GHz - 8.5 GHz
- > 8.5 GHz - 26.5 GHz
- > 26.5 GHz - 50 GHz
- > 50 GHz
- Noise Figure Analyzers
- Parameter Analyzers
- Phase Analyzers
- Signal Analyzers
- Signal Source Analyzers
- Source Analyzers »
- Spectrum Analyzers »
- Generators »
- Meters »
- Oscilloscopes »
- Power Supply »
- Other »
N4693A - Keysight (Agilent) Network Analyzer
- Model: N4693A
- Manufactured by: Keysight / Agilent Technologies
Keysight Agilent N4693A-00F/150 N4693-60003 Electronic Calibration Module (ECal), 10 MHz to 50 GHz, 2.4 mm, 2-port
Option Installed:
00F - Both 2.4 mm connectors are female on module
150 - Wooden Storage Box
Features:
10 MHz to 50 GHz frequency range
USB interface for direct control with PNA and ENA series of network analyzers
Fast calibration
Full two-port calibration with a single connection
Reduced connector wear
NIST traceable accurate calibrations
Reliable solid-state switching
Description:
The Keysight N4693A MW electronic calibration (ECal) module makes calibration of vector network analyzers fast, easy and accurate. The RF ECal system is now easily controlled by one of two methods depending on the network analyzer. The Keysight PNA and ENA series of network analyzers controls the module directly via the USB interface.
ECal is an ideal solution for calibrating network analyzers. Performing a full two-port calibration takes less than half the time and number of connections using ECal versus mechanical cal kits. Furthermore, the accuracy of the calibration is comparable between electronic and mechanical methods. Traditional mechanical calibrations require intensive operator interaction which is prone to errors. With ECal, the operator simply connects the ECal module to the network analyzer and the software controls the rest.
Option Installed:
00F - Both 2.4 mm connectors are female on module
150 - Wooden Storage Box
Features:
10 MHz to 50 GHz frequency range
USB interface for direct control with PNA and ENA series of network analyzers
Fast calibration
Full two-port calibration with a single connection
Reduced connector wear
NIST traceable accurate calibrations
Reliable solid-state switching
Description:
The Keysight N4693A MW electronic calibration (ECal) module makes calibration of vector network analyzers fast, easy and accurate. The RF ECal system is now easily controlled by one of two methods depending on the network analyzer. The Keysight PNA and ENA series of network analyzers controls the module directly via the USB interface.
ECal is an ideal solution for calibrating network analyzers. Performing a full two-port calibration takes less than half the time and number of connections using ECal versus mechanical cal kits. Furthermore, the accuracy of the calibration is comparable between electronic and mechanical methods. Traditional mechanical calibrations require intensive operator interaction which is prone to errors. With ECal, the operator simply connects the ECal module to the network analyzer and the software controls the rest.
Your IP Address is: 35.171.164.77
Copyright © 2024 RFTE Solutions