Test Equipment
- Analyzers »
- Generators »
- Meters »
- Oscilloscopes »
- Power Supply »
- Other »
- AC Power Source
- Amplifiers
- Attenuators
- Bit Error Rate Testers
- Cable Analyzers
- Cables
- Calibrators
- Coaxial Detectors
- Communication Equipment
- Current Preamplifier
- Curve Tracer
- Data Acquisition
- Directional Bridge
- Electronic Load
- Frequency Counters
- Lock-in Amplifiers
- Optical
- Power Loggers
- Probes
ONT-603D - JDSU (Viavi) Optical Network Tester
- Model: ONT-603D
- Manufactured by: JDSU
JDSU Viavi ONT603D Optical Network Tester with Display and High-End Controller (Configuration listed below).
Configuration:
92.83-/92.83-CFP2 100G/111G Phy/Data Dual Port
94.30-/94.30-CFP2 Hardware Validation
94.40-/94.40-Enable more BULK enhanced muxing stacks in dual-port mode
94.50-/94.50-100G Ethernet
94.51-/94.51-40G Ethernet
94.53-/94.53-100G/40G OTU4 with Client
94.54-/94.54-Multistream / IP/
94.55-/94.55-111.8G OTN Bulk
94.60-/94.60-100G/40G OTU3 with Client Via Transcoding
94.61-/94.61-100G/40G OTN Enhanced Multiplexing
94.62-/94.62-100G/40G OTN Multistage Multiplexing
94.63-/94.63-100G/40G OTN ODU0 Bulk
94.70-/94.70-100G/40G 1 GigE Client Software
94.73-/94.73-100G/40G OTN ODU Multi-Channel support
94.81-/94.81-3061/94.81, 100G_40G OTN Control Plane Enhancements
Description:
The modular design of the ONT-600 platform offers high flexibility and lets users operate multiple test modules simultaneously. The ONT-600 comes in a variety of mainframes and application modules, ranging from “single-port” point tools up to a full 19” rack-mounted multi-slot, multi-port and multiuser solution that satisfies sophisticated SVT needs.
Applications:
Detailed hardware level testing with unframed and protocol-based traffic.
25G, 50G, 100G and 400G Optical Modules validation.
Support for OTN and FlexO, Ethernet/FlexE and eCPRI, Fibre Channel, CPRI, and SONET/SDH
Key Features:
Supports testing of all major Optical Transport technologies and services in the range from 155 Mbps up to 400 Gbps and beyond. Comprehensive range of supported physical interfaces
Test Applications for R&D, System Verification Test and Manufacturing include advanced error analysis, delay and service disruption tests, full overhead analysis, and skew tests for multilane signals
Multiple mainframe options including rack-mount solutions and benchtop instruments with built-in display
OTN: up to OTU4 / OTUC4 with ODU Muxing down to ODU0; ODUflex via OTUk, FlexO and OTLCn; ODU Multichannel
Ethernet: Gigabit Ethernet up to 400 GE and FlexE fully supported with full stress/margin analysis
SDH/SONET: 155 Mbps up to 40 Gbps, both native and mapped into OTN containers.
Fibre Channel: 1/2/4/8/10/16/32G Fibre Channel
CPRI: unframed and framed testing, CPRI line bit rate option 1 (614.40 Mbps) up to option 9 (12.165 Gbps); eCPRI
Most accurate latency and service disruptions measurements for OTN, Ethernet, CPRI, Fibre Channel, and SONET/SDH
Browser-oriented graphical user interface (GUI) Full multitasking and multi-user operation
Full automation support via CLI or with drivers and libraries for LabWindows CVI, LabView, Python and Tcl/Tk
Configuration:
92.83-/92.83-CFP2 100G/111G Phy/Data Dual Port
94.30-/94.30-CFP2 Hardware Validation
94.40-/94.40-Enable more BULK enhanced muxing stacks in dual-port mode
94.50-/94.50-100G Ethernet
94.51-/94.51-40G Ethernet
94.53-/94.53-100G/40G OTU4 with Client
94.54-/94.54-Multistream / IP/
94.55-/94.55-111.8G OTN Bulk
94.60-/94.60-100G/40G OTU3 with Client Via Transcoding
94.61-/94.61-100G/40G OTN Enhanced Multiplexing
94.62-/94.62-100G/40G OTN Multistage Multiplexing
94.63-/94.63-100G/40G OTN ODU0 Bulk
94.70-/94.70-100G/40G 1 GigE Client Software
94.73-/94.73-100G/40G OTN ODU Multi-Channel support
94.81-/94.81-3061/94.81, 100G_40G OTN Control Plane Enhancements
Description:
The modular design of the ONT-600 platform offers high flexibility and lets users operate multiple test modules simultaneously. The ONT-600 comes in a variety of mainframes and application modules, ranging from “single-port” point tools up to a full 19” rack-mounted multi-slot, multi-port and multiuser solution that satisfies sophisticated SVT needs.
Applications:
Detailed hardware level testing with unframed and protocol-based traffic.
25G, 50G, 100G and 400G Optical Modules validation.
Support for OTN and FlexO, Ethernet/FlexE and eCPRI, Fibre Channel, CPRI, and SONET/SDH
Key Features:
Supports testing of all major Optical Transport technologies and services in the range from 155 Mbps up to 400 Gbps and beyond. Comprehensive range of supported physical interfaces
Test Applications for R&D, System Verification Test and Manufacturing include advanced error analysis, delay and service disruption tests, full overhead analysis, and skew tests for multilane signals
Multiple mainframe options including rack-mount solutions and benchtop instruments with built-in display
OTN: up to OTU4 / OTUC4 with ODU Muxing down to ODU0; ODUflex via OTUk, FlexO and OTLCn; ODU Multichannel
Ethernet: Gigabit Ethernet up to 400 GE and FlexE fully supported with full stress/margin analysis
SDH/SONET: 155 Mbps up to 40 Gbps, both native and mapped into OTN containers.
Fibre Channel: 1/2/4/8/10/16/32G Fibre Channel
CPRI: unframed and framed testing, CPRI line bit rate option 1 (614.40 Mbps) up to option 9 (12.165 Gbps); eCPRI
Most accurate latency and service disruptions measurements for OTN, Ethernet, CPRI, Fibre Channel, and SONET/SDH
Browser-oriented graphical user interface (GUI) Full multitasking and multi-user operation
Full automation support via CLI or with drivers and libraries for LabWindows CVI, LabView, Python and Tcl/Tk
Your IP Address is: 18.226.88.151
Copyright © 2024 RFTE Solutions